DEVM/1/hwFanInvalid_active-139268

Message

DEVM/1/hwFanInvalid_active: The fan module failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=139268, Reason=The fan register failed.)

In VS mode, this log is supported only by the admin VS.

Description

The fan function is disabled.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The fan register failed.

Procedure

1. Remove the fan module and insert it again.

If the fan module is registered, it indicates that the fan module was improperly inserted.
If the fan module is not registered, replace the fan module.

2. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.

3. End.