DRIVER/2/hwFlexEPhyFcsSdAlarm_active

Message

DRIVER/2/hwFlexEPhyFcsSdAlarm_active: The FCS-SD error is rising.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Description

The FCS-SD error is rising.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

Possible Causes

The FlexE physical interface receives fcs-sd data.

Procedure

1. Check whether the optical fiber is properly connected. The optical fiber has card fasteners. If you hear a click sound, the optical fiber is properly connected. Then, run the display this interface command to check whether the interface is Up.

If so, go to Step 2.
If not, go to Step 3.

2. Run the display this interface command in the interface view to check whether the receive optical power of the optical module is in the normal range.

If so, go to Step 3.
If not, go to Step 3.

3. Collect alarm information, log information and configuration information, and then contact technical support personnel.

4. End.