DRIVER/2/hwFlexEPhyFcsSdAlarm_clear

Message

DRIVER/2/hwFlexEPhyFcsSdAlarm_clear: The FCS-SD error alarm resume.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

Possible Causes

The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.