BRASAM/4/hwIPPoolIsolatedCauseMainboardReset

Message

BRASAM/4/hwIPPoolIsolatedCauseMainboardReset: The master main control board is reset after the address pool is isolated. (PoolName=[PoolName],PoolIndex=[PoolIndex])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The master main control board was restarted after the address pool was isolated.

Parameters

Parameter Name	Parameter Meaning
PoolName	Name of an address pool
PoolIndex	Index of an address pool

Possible Causes

User login failed, and the address pool had been isolated for 20 times.

Procedure

1. Wait for the master main control board to restart.

2. Check whether the address pool is isolated again.

If so, go to Step 3.
If not, go to Step 4.

3. Collect trap, log, and configuration information, and contact technical support personnel.

4. End.