BRASAM/4/hwIPv6AddressExhaustAlarm_active
Message
BRASAM/4/hwIPv6AddressExhaustAlarm_active: The IPv6 addresses in the IPv6 pool is exhausted.(IPv6PoolIndex=[IPv6PoolIndex],IPv6PoolName=[IPv6PoolName])
In VS mode, this log is supported only by the admin VS.
Description
Addresses in the IPv6 address pool were exhausted and alarm was executed when an IPv6 address is not assigned.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
IPv6PoolIndex |
index of address pool |
|
IPv6PoolName |
name of address pool |
Procedure
1. Check the usage of the IPv6 address pool bound to the domain and check whether addresses are adequate for users who access the Internet through this domain.
- If the addresses are enough, delete the alarm manually.
- If the addresses are not enough, go to Step 2.
2. Bind a new IPv6 address pool to the domain.
3. Check whether the alarm persists.
- If the alarm persists, go to Step 4.
- If not, go to Step 5.
4. Collect alarm information, log information and configuration information, and then contact technical support personnel.
5. End.