IFNET/4/hwIfDampSuppress_clear

Cause 1: The interface was added to a VS.Cause 2: The interface is offline.Cause 3: The suppression penalty value of the interface fell below the reuse value.Cause 4: The interface suppression function is disabled in system view or interface view.Cause 5: The damp-interface level configuration was changed.Cause 6: The damp-interface enable command was run in the system view, and the damp-interface ignore-global command was run in the interface view, which cleared related alarms on the interface.Cause 7: The damp-interface enable command was run in the system view, and the damp-interface enable command was run in the interface view, which cleared related alarms on the interface. The physical status suppression configurations on the interface takes precedence over the global configurations.Cause 8: The shutdown and undo shutdown commands were run in sequence on the local interface.