BRASUM/4/hwIpv4FramedRouteThresholdAlarm_active
Message
BRASUM/4/hwIpv4FramedRouteThresholdAlarm_active: The ipv4 framed route usage exceeds the upper threshold. (ipv4FramedRouteUsage=[ipv4FramedRouteUsage])
This log is supported only on NetEngine 8000 F1A.
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
ipv4FramedRouteUsage |
Usage of the IPv4 routes generated based on the Framed-Route attribute |
Possible Causes
The number of IPv4 routes generated based on the RADIUS-delivered Framed-Route attribute exceeded 90% of the specification.
Procedure
1.Replan networking so that the number of IPv4 routes generated based on the Frame-Route attribute falls below 80% of the specification. Then, check whether the trap is cleared.
- If the trap is cleared, go to step 3.
- If the trap persists, go to step 2.
2.Collect trap, log, and configuration information and contact technical support engineers.
3.End