L2VPN/4/hwL2DomainMacLimitNumRaisingThreshold_active: The number of broadcast domain MAC addresses learned reached the upper threshold. (EntPhysicalIndex=[EntPhysicalIndex], PhyscialName=[PhyscialName], MacLimitVlanId=[Vlan_ID], MacLimitVsiName=[MacLimitVsiName], MacLimitBDId=[BD_ID], MacLimitEvpnName=[evpn_name], TrapSeverity=[TrapSeverity], TrapProbableCause=[TrapProbableCause], TrapEventType=[TrapEventType], MacDynAddressLearnNum=[MacDynAddressLearnNum], MacLimitMaxMac=[MacLimitMaxMac], MacLimitUpthreshold=[MacLimitUpthreshold], MacLimitDownthreshold=[MacLimitDownthreshold]).
After broadcast domain MAC address limit was configured and the trap function for MAC address limit was enabled, the number of learned dynamic MAC addresses reached the configured upper limit.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
PhyscialName |
Indicates the name of the physical entity. |
|
Vlan_ID |
VLAN ID. |
|
MacLimitVsiName |
Vsi Name. |
|
BD_ID |
BD name. |
|
evpn_name |
EVPN name. |
|
TrapSeverity |
Alarm Severity. |
|
TrapProbableCause |
Alarm Cause. |
|
TrapEventType |
Alarm Event Type. |
|
MacDynAddressLearnNum |
Number of currently learned MAC addresses. |
|
MacLimitMaxMac |
Maximum number of MAC address limit. |
|
MacLimitUpthreshold |
Upper threshold of MAC address limit. |
|
MacLimitDownthreshold |
Lower threshold of MAC address limit. |
After MAC address limit was configured and the trap function for MAC address limit was enabled, the number of learned dynamic MAC addresses reached the configured upper threshold.
1.Run the reset mac-address command in the user view to delete unwanted MAC address entries.
2.Run the mac-limit maximum command in the VSI view to properly reconfigure an upper threshold for MAC addresses that can be learned. Then check whether the alarm is cleared.
3.Collect trap, log, and configuration information, and contact technical support personnel.
4.End.