L2VPN/3/hwL2vpnOamSd2Near_clear: The OAM module reported an alarm, indicating that the near-end packet loss ratio dropped below the sd2 threshold. (ServiceType=[ServiceType], ProtocolType=[ProtocolType], VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], IfIndex=[IfIndex], PwMaster=[PwMaster], RmtSiteID=[RmtSiteID], InLabel=[InLabel], OutLabel=[OutLabel], IfName=[IfName], VsiName=[VsiName])
| Parameter Name | Parameter Meaning |
|---|---|
|
ServiceType |
Type of the service: - 0: VLL - 1: VPLS |
|
ProtocolType |
Type of the protocol: - 0: SVC - 1: LDP - 2: BGP (not supported for the time being) |
|
VcID |
VC ID |
|
VcType |
VC type |
|
PeerAddr |
IP address of the peer |
|
IfIndex |
Interface index |
|
PwMaster |
PW identifier: - 1: primary PW - 2: secondary PW |
|
RmtSiteID |
Remote site ID |
|
InLabel |
VC in-label |
|
OutLabel |
VC out-label |
|
IfName |
Interface name |
|
VsiName |
VSI name |
This trap message is informational only, and no action is required.