FEI_TPOAM/3/hwL2vpnOamTunnelNonSupport_clear

Message

FEI_TPOAM/3/hwL2vpnOamTunnelNonSupport_clear: The alarm that OAM for PW does not support the current public tunnel is resumed.(VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], OamType=[OamType])

This log is supported only on NetEngine 8000 F1A.

Parameters

Parameter Name	Parameter Meaning
VcID	Identifier of the layer 2 virtual circuit.
VcType	VC Type: 1-FR. 2-ATM_AAL5. 3-ATM_CELL_TRANSPORT. 4-VLAN. 5-ETHERNET. 6-HDLC. 7-PPP. 8-CEM. 9-ATM_CELL_VCC. 10-ATM_CELL_VPC. 11-IP_LAYER2_TRANSPORT. 12-ATM_ONE_TO_ONE_VCC_CELL_MODE. 13-ATM_ONE_TO_ONE_VPC_CELL_MODE. 14-ATM_AAL5_PDU_VCC_TRANSPORT. 15-FR_PORT. 16-CEP. 17-SAT_E1_OVER_PACKET. 18-SAT_T1_OVER_PACKET. 19-SAT_E3_OVER_PACKET. 20-SAT_T3_OVER_PACKET. 21-CESOPSN_BASIC_MODE. 22-TDMOIP_AAL1. 23-CESOPSN_TDM. 24-TDMOIP_AAL2. 25-FR_DLCI. 26-INTERWORKING. 27-VPLS. 64-IP_INTERWORKING.
PeerAddr	Peer IP address.
OamType	OAM Type: 1-MPLS OAM. 2-MPLS-TP OAM.

Possible Causes

MPLS OAM or MPLS-TP OAM for PW became in support of the public network tunnel.

Procedure

This trap is informational only, and no action is required.