SOC/4/hwL3LoopDetectAlarm_clear: L3 loop detect alarm cleared. (ChassisID=[hwL3LoopDetectChassisID], Slot=[hwL3LoopDetectSlotID], IP=[hwL3LoopDetectIPAddr])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwL3LoopDetectChassisID |
Chassis ID. |
|
hwL3LoopDetectSlotID |
Slot ID. |
|
hwL3LoopDetectIPAddr |
IP address. |
For a destination IP address for which an alarm has been reported, a tracert operation is performed every 2 minutes. The alarm is cleared after the routing loop is removed.
This trap message is informational only, and no action is required.