MPLS_LSPM/3/hwMplsOamLocalLock_active

Message

MPLS_LSPM/3/hwMplsOamLocalLock_active: The tunnel has been locked. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Description

A locking command was delivered at the tunnel layer.

Parameters

Parameter Name	Parameter Meaning
SessionTunnelId	Indicates the tunnel ID.
LocalLspId	Indicates the tunnel LSP ID.
IngressLsrId	Indicates the address of the ingress of a tunnel.
EgressLsrId	Specifies the destination IP address of a tunnel.
TunnelName	Indicates the interface name of a tunnel.
SgnlPrtcl	Indicates the tunnel protocol ID. Ranges: 1: RSVP 2: STATIC 3: CRSTATIC
SignalledTunnelName	User-Defined Tunnel Name

Possible Causes

The tunnel-layer locking configuration was delivered on the ingress.

Procedure

Check whether the local NE has the tunnel-layer locking configuration delivered.