MPLS_LSPM/3/hwMplsOamLocalLock_clear: The tunnel has not been locked.(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
| Parameter Name | Parameter Meaning |
|---|---|
|
SessionTunnelId |
Indicates the tunnel ID. |
|
LocalLspId |
Indicates the tunnel LSP ID. |
|
IngressLsrId |
Indicates the address of the ingress of a tunnel. |
|
EgressLsrId |
Specifies the destination IP address of a tunnel. |
|
TunnelName |
Indicates the interface name of a tunnel. |
|
SgnlPrtcl |
Indicates the tunnel protocol ID. Ranges:
|
|
SignalledTunnelName |
User-Defined Tunnel Name |
The configuration for locking the tunnel layer is canceled on the ingress of the tunnel.
The alarm is informational only, and no action is required.