MPLS_LSPM/3/hwMplsOamRdi_clear: The RDI alarm received by the tunnel is cleared. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
| Parameter Name | Parameter Meaning |
|---|---|
|
SessionTunnelId |
Tunnel ID |
|
LocalLspId |
Local LSP ID |
|
IngressLsrId |
ID of the ingress LSR |
|
EgressLsrId |
ID of the egress LSR |
|
TunnelName |
Tunnel name |
|
SgnlPrtcl |
Tunneling protocol Ranges:
|
|
SignalledTunnelName |
Tunnel alias. |
|
LsrRole |
Lsp Lsr Role. |
A CC alarm is generated on the peer end, and is cleared after the detected MPLS tunnel restores to the normal state.
1. Contact engineers of the peer end to check whether a CC alarm is cleared on the peer end.
2. This alarm is informational only, and no action is required. Then go to Step 4.
3. Collect alarm information and configuration information, and then contact technical support personnel.
4. End.