MPLS_LSPM/3/hwMplsResourceThresholdExceed_active

Message

MPLS_LSPM/3/hwMplsResourceThresholdExceed_active: The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[MplsResourceType], hwMplsResourceCurrentCount=[ResourceCurrentCount], hwMplsResourceThreshold=[ResourceThreshold], hwMplsResourceTotalCount=[ResourceTotalCount])

In VS mode, this log is supported only by the admin VS.

Description

The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.

Parameters

Parameter Name	Parameter Meaning
MplsResourceType	Type of MPLS resource. LDP XC Resource (1) MLDP Tree Resource (5) MLDP Branch Resource (6) LDP Remote Peer Resource (7) LDP OutSegment Resource (8) LDP Interface Resource (10)
ResourceCurrentCount	Number of available MPLS resources
ResourceThreshold	Upper alarm threshold for MPLS resource usage
ResourceTotalCount	Maximum number of MPLS resources supported by a device

Possible Causes

The number of MPLS resources of a specific type reached the upper threshold.

Procedure

1. Check the hwMplsResourceType field and obtain the MPLS resource type.

2. Check whether hwMplsResourceThreshold is set in a specified range.

If the value is within the specified range, go to Step 4.
If the value is out of the specified range, go to Step 3.

3. Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 6.
If the alarm persists, go to Step 4.

4. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 6.
If the alarm persists, go to Step 5.

5. Collect alarm information and configuration information, and then contact technical support personnel.

6. End.