MPLS_LSPM/2/hwMplsTunnelHotstandbyDown_clear: The down alarm about the hot-standby LSP in the tunnel was cleared.(SessionTunnelId=[SessionTunnelId], TunnelInstIndex=[TunnelInstIndex], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], mplsTunnelIfName=[mplsTunnelIfName], SignalledTunnelName=[SignalledTunnelName])
| Parameter Name | Parameter Meaning |
|---|---|
|
SessionTunnelId |
Indicates the ID of the tunnel. |
|
TunnelInstIndex |
Indicates the InstIndex of the tunnel. |
|
IngressLsrId |
Indicates the LSR ID of the ingress on the tunnel. |
|
EgressLsrId |
Indicates the LSR ID of the egress on the tunnel. |
|
mplsTunnelIfName |
Indicates the name of a tunnel. |
|
SignalledTunnelName |
Tunnel alias. |
This trap message is informational only, and no action is required.