MPLS_LSPM/2/hwMplsTunnelHotstandbySwitch_active

Message

MPLS_LSPM/2/hwMplsTunnelHotstandbySwitch_active: Traffic switched from the primary LSP to the hot-standby LSP.(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalledTunnelName=[SignalledTunnelName])

Description

Traffic was switched from the primary LSP to the hot-standby LSP.

Parameters

Parameter Name	Parameter Meaning
SessionTunnelId	Session tunnel ID
LocalLspId	Local LSP ID
IngressLsrId	Ingress LSR ID
EgressLsrId	Egress LSR ID
TunnelName	Tunnel name
SignalledTunnelName	User-Defined Tunnel Name

Possible Causes

The primary LSP went Down, and the hot-standby LSP was working properly.

Procedure

Check that the primary LSP is working properly.