MPLS_LSPM/2/hwMplsTunnelTpOamLossSD_clear

Message

MPLS_LSPM/2/hwMplsTunnelTpOamLossSD_clear: The local SD1 alarm received by the tunnel is cleared. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Parameters

Parameter Name	Parameter Meaning
SessionTunnelId	Tunnel Id.
LocalLspId	Local Lsp Id.
IngressLsrId	Ingress Lsr Id.
EgressLsrId	Egress Lsr Id.
TunnelName	Tunnel Interface Name.
SgnlPrtcl	Tunnel Signal Protocol. Ranges: - 1: RSVP - 2: STATIC - 3: CRSTATIC PTN7900,PTN9X0: Ranges: - 1: RSVP - 2: STATIC - 3: CRSTATIC - 4: SEGMENT_ROUTING
SignalledTunnelName	User-Defined Tunnel Name

Possible Causes

An SD1 alarm was generated on the local end, and this alarm is now cleared.

Procedure

1. This alarm is informational only, and no action is required.