PIC/1/hwOpticalFail_clear

Message

PIC/1/hwOpticalFail_clear: The optical module resumed from partial failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], ReasonDescription =[ReasonDescription])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntPhysicalName	Name of the physical entity.
EntityTrapFaultID	Error code.
ReasonDescription	Indicates the description of the possible cause.

Possible Causes

Cause 135936:The fault triggering the alarm was rectified.
Cause 135937:The fault triggering the alarm was rectified.
Cause 135938:The fault triggering the alarm was rectified.
Cause 135939:The fault triggering the alarm was rectified.
Cause 135940:The fault triggering the alarm was rectified.
Cause 135941:The fault triggering the alarm was rectified.
Cause 135942:The fault triggering the alarm was rectified.
Cause 135943:The fault triggering the alarm was rectified.
Cause 135944:The fault triggering the alarm was rectified.
Cause 135947:The frequency out-of-lock fault on the Smart-Clock module was rectified.
Cause 135948:The time out-of-lock fault on the Smart-Clock module was rectified.

Procedure

This trap message is informational only, and no action is required.