PIC/1/hwOpticalFail_active-135948

Message

PIC/1/hwOpticalFail_active: The optical module failed partially. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=135948, ReasonDescription=The Smart-Clock module time lock state is failed.)

In VS mode, this log is supported only by the admin VS.

Description

The optical module failed partially.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntPhysicalName	Name of the physical entity.
EntityTrapFaultID	Error code.
ReasonDescription	Indicates the description of the possible cause.

Possible Causes

The Smart-Clock module time lock state is failed.

Procedure

1. Adjust the GPS antenna. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 2.

2. Replace the antenna system. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 2.

3. Collect alarm information, log information and configuration information, and then contact technical support personnel.

4. End.