L2VPN/4/hwPbbEvpnNotSupportTunnelAlarm_clear
Message
L2VPN/4/hwPbbEvpnNotSupportTunnelAlarm_clear: The public network tunnel used to carry the PBB EVPN support forwarded traffic successfully.(EvpnName=[hwNotSupportTunnelEvpnName], RemoteIp=[hwEVPNPeerRemoteIp], TunnelType=[hwNotSupportTunnelType])
This log is supported only on NetEngine 8000 F1A.
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
hwNotSupportTunnelEvpnName |
EVPN Name. |
|
hwEVPNPeerRemoteIp |
Remote IP. |
|
hwNotSupportTunnelType |
Tunnel Type. |
Possible Causes
- Cause 1:The PBB EVPN service was not transmitted through a BGP tunnel or iterated to any tunnel.
- Cause 2:The PBB EVPN service was not transmitted through a E2E-SRTE tunnel or iterated to any tunnel.
- Cause 3:The PBB EVPN service was not transmitted through a TE over GRE tunnel or iterated to any tunnel.
Procedure
This trap message is informational only, and no action is required.