BRASAM/4/hwPoolGroupUsedIPExhaust_active
Message
BRASAM/4/hwPoolGroupUsedIPExhaust_active: The number of IP addresses in the IP pool group is exhausted. (PoolGroupNo.=[PoolGroupNo],PoolGroupName=[PoolGroupName])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
PoolGroupNo |
Index of an address pool group. |
|
PoolGroupName |
Name of an address pool group. |
Possible Causes
The number of access users increased and IP addresses in the IP address pool group were exhausted.
Procedure
1. Run the ip-pool command in the IP address pool group view to bind IP address pools that have many available addresses to the IP address pool group. Or, run the section section-num start-ip-address [ end-ip-address ] command in the view of an address pool that has been bound to the IP address pool group to increase the number of IP addresses. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 3.
- If the alarm persists, go to Step 2.
2. Collect alarm information, log information and configuration information, and then contact Huawei technical support personnel.
3. End.