BRASAM/4/hwPoolGroupUsedIPReachThreshold_clear

Message

BRASAM/4/hwPoolGroupUsedIPReachThreshold_clear: The number of IP addresses in the IP pool group is under the threshold. (PoolGroupNo.=[PoolGroupNo],PoolGroupName=[PoolGroupName])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
PoolGroupNo	Index ID of an address pool group.
PoolGroupName	Name of the address pool group.

Possible Causes

The address utilization rate of the pool group fell below 90% of the threshold.

Procedure

The case is normal, and no processing is required.