DEVM/1/hwPowerFail_active: A power module experienced a partial failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136707, Reason=The power module failed.)
In VS mode, this log is supported only by the admin VS.
The power supply experienced a partial failure, which may be caused by a component failure.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
The index for this entry. |
|
EntPhysicalIndex |
The index for this entry. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
Reason |
Reason. |
1. Run the display device slot-id command in the user view to view information about the faulty power supply module. Check whether all components are in PRESENT state and all the Status items are normal.
2. Replace the faulty components or the power supply module.
3. If the alarm persists, collect trap, log, and configuration information, and contact technical support.
4. End.