DEVM/1/hwPowerFail_active: A power module experienced a partial failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136719, Reason=At least one input is not valid.)
In VS mode, this log is supported only by the admin VS.
The power supply experienced a partial failure, which may be caused by a component failure.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
The index for this entry. |
|
EntPhysicalIndex |
The index for this entry. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
Reason |
Reason. |
1. Check whether the cable is properly connected to the PM module.
2. Collect trap, log, and configuration information, and contact technical support.
3. End.