DEVM/1/hwPowerFail_active-136988

Message

DEVM/1/hwPowerFail_active: A power module experienced a partial failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136988, Reason=The app of the power module is abnormal.)

In VS mode, this log is supported only by the admin VS.

Description

The power supply experienced a partial failure, which may be caused by a component failure.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The app of the power module is abnormal.

Procedure

1. Upgrade the PM module.

2. Upgrade end and check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 3.

3. Replace the power module.

Power off the faulty power module before replacing it.

Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 4.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.