DEVM/1/hwPowerFail_clear

Message

DEVM/1/hwPowerFail_clear: The power resumed from partial failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name Parameter Meaning

EntityPhysicalIndex

The index for this entry.

EntPhysicalIndex

The index for this entry.

EntPhysicalName

The textual name of the physical entity.

EntityTrapFaultID

To describe the fault id of trap.

Reason

Reason.

Possible Causes

  • Cause 136704:The channel between the power module and the device is ok.
  • Cause 136705:The fans inside the power module normal.
  • Cause 136706:The lightning protection device inside the power module is ok.
  • Cause 136707:The power module is ok.
  • Cause 136708:The EEPROM on the power module ok.
  • Cause 136709:The lightning protection component of the power supply module ok(1+1-).
  • Cause 136710:The lightning protection component of the power supply module ok(2+2-).
  • Cause 136713:The port expander chip on the power module restored.
  • Cause 136714:The current of the power is average.
  • Cause 136719:The input of power module is normal.
  • Cause 136726:Hardware type of a power board was obtained.
  • Cause 136727:The switch 1 on a power module is closed.
  • Cause 136728:The switch 2 on a power module is closed.
  • Cause 136734:The current of the power is average.
  • Cause 136740:The power module exists.
  • Cause 136741:The power current is normal.
  • Cause 136742:The power canbus is normal.
  • Cause 136743:The power id address is ok.
  • Cause 136744:The AC power module was installed in the power supply slot.
  • Cause 136745:PWR(PEM) SLOT 8/9 is matched
  • Cause 136966:The power module was installed and powered on.
  • Cause 136970:The power module was installed and powered on(1+1-).
  • Cause 136971:The power module was installed and powered on(2+2-).
  • Cause 136988:The app of the power module is abnormal.

Procedure

This trap message is informational only, and no action is required.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >