DEVM/1/hwPowerInvalid_active-136960

Message

DEVM/1/hwPowerInvalid_active: A power module experienced a complete failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136960, Reason=Power 18 is failed, the power module PSU0 is absent.)

In VS mode, this log is supported only by the admin VS.

Description

Power invalid.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The power supply module was not in position.

Procedure

1. Check whether the power supply module is installed.

If so, go to Step 2.
If not, install a power supply module.

2. Check whether the power supply module is installed securely.

If so, go to Step 3.

3. Replace the power supply module. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.

4. End.