DEVM/1/hwPowerInvalid_active: A power module experienced a complete failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136962, Reason=Over-input-voltage occurred on the power module.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
The index for this entry. |
|
EntPhysicalIndex |
The index for this entry. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
Reason |
Reason. |
1. Check whether external power supply is normal. - If so, go to Step 2.
2. Replace the power supply module. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.
3. End.