DEVM/1/hwPowerInvalid_active-136964

Message

DEVM/1/hwPowerInvalid_active: A power module experienced a complete failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136964, Reason=Over-temperature occurred on the power module.)

In VS mode, this log is supported only by the admin VS.

Description

Power invalid.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

Over-temperature occurred on the power module.

Procedure

1. Check ventilation on the router and in the equipment room. If the ventilation conditions are normal, go to Step 2.

2. Check whether the power supply module is normal. - If so, go to Step 3.

3. Replace the power supply module.

4. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.

5. End.