DEVM/1/hwPowerInvalid_active-136982

Message

DEVM/1/hwPowerInvalid_active: A power module experienced a complete failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136982, Reason=The power type does not match the type of the backplane.)

In VS mode, this log is supported only by the admin VS.

Description

Power invalid.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The power type does not match the type of the backplane.

Procedure

1. Check whether the power module and backplane types match. If they do not match, replace the power module with one matching the backplane type and then check whether the trap is cleared.

If the trap is cleared, go to Step 3.
If the trap persists, go to Step 2.

2. Collect trap, log, and configuration information, and contact technical support personnel.

3. End.