FEI_APS/3/hwPwApsTunnelNonSupport_clear

Message

FEI_APS/3/hwPwApsTunnelNonSupport_clear: The alarm that PW APS does not support the current public tunnel is resumed.(VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr])

This log is supported only on NetEngine 8000 F1A.

Parameters

Parameter Name	Parameter Meaning
VcID	ID of a VC
VcType	VC Type: 1: FR 2: ATM_AAL5 3: ATM_CELL_TRANSPORT 4: VLAN 5: ETHERNET 6: HDLC 7: PPP 8: CEM 9: ATM_CELL_VCC 10: ATM_CELL_VPC 11: IP_LAYER2_TRANSPORT 12: ATM_ONE_TO_ONE_VCC_CELL_MODE 13: ATM_ONE_TO_ONE_VPC_CELL_MODE 14: ATM_AAL5_PDU_VCC_TRANSPORT 15: FR_PORT 16: CEP 17: SAT_E1_OVER_PACKET 18: SAT_T1_OVER_PACKET 19: SAT_E3_OVER_PACKET 20: SAT_T3_OVER_PACKET 21: CESOPSN_BASIC_MODE 22: TDMOIP_AAL1 23: CESOPSN_TDM 24: TDMOIP_AAL2 25: FR_DLCI 26: INTERWORKING 27: VPLS 64: IP_INTERWORKING
PeerAddr	Peer IP address

Possible Causes

Cause 1: The PW service was faulty.

Cause 2: The bearer tunnel of the PW changed to be a TE tunnel.

Procedure

This trap message is informational only, and no action is required.