L2VPN/4/hwPwMacLimitNumRaisingThreshold_active: Mac address learning based on PW reached the limit. (MacLimitVsiName=[MacLimitVsiName], MacLimitPwName=[MacLimitPwName], TrapSeverity=[TrapSeverity], TrapProbableCause=[TrapProbableCause], TrapEventType=[TrapEventType], MacDynAddressLearnNum=[MacDynAddressLearnNum], MacLimitMaxMac=[MacLimitMaxMac])
In VS mode, this log is supported only by the admin VS.
PW MAC limit and its alarm function are enabled. An alarm is generated when the number of dynamically learned MAC addresses reaches the specified upper limit.
| Parameter Name | Parameter Meaning |
|---|---|
|
MacLimitVsiName |
Vsi Name. |
|
MacLimitPwName |
Pw Name. |
|
TrapSeverity |
Alarm Severity. |
|
TrapProbableCause |
Alarm Cause. |
|
TrapEventType |
Alarm Event Type |
|
MacDynAddressLearnNum |
Number of currently learned MAC addresses. |
|
MacLimitMaxMac |
Maximum number of MAC address limit. |
After PW-based MAC address limit was configured and the trap function for MAC address limit was enabled, the number of learned dynamic MAC addresses reached the configured upper limit.
1.Run the mac-limit command to modify the number of MAC addresses that can be learned.
2.Collect alarm information, log information and configuration information, and then contact technical support personnel.