L2VPN/4/hwPwMacLimitNumRaisingThreshold_clear: Mac address learning based on PW is resumed. (MacLimitVsiName=[MacLimitVsiName], MacLimitPwName=[MacLimitPwName], TrapSeverity=[TrapSeverity], TrapProbableCause=[TrapProbableCause], TrapEventType=[TrapEventType], MacDynAddressLearnNum=[MacDynAddressLearnNum], MacLimitMaxMac=[MacLimitMaxMac])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
MacLimitVsiName |
Vsi Name. |
|
MacLimitPwName |
Pw Name. |
|
TrapSeverity |
Alarm Severity. |
|
TrapProbableCause |
Alarm Cause. |
|
TrapEventType |
Alarm Event Type |
|
MacDynAddressLearnNum |
Number of currently learned MAC addresses. |
|
MacLimitMaxMac |
Maximum number of MAC address limit. |
After MAC address limit was configured and the trap function for MAC address limit was enabled, the number of learned dynamic MAC addresses reached the configured upper limit. The number of learned dynamic MAC addresses then decreased to less than the MAC address limit because certain MAC addresses were aged. Consequently, an alarm was generated to inform the user.
This trap message is informational only, and no action is required.