L2VPN/4/hwPwSourceTunnelCheckAlarm_clear

Message

L2VPN/4/hwPwSourceTunnelCheckAlarm_clear: No mismatch packets are found during the PW source tunnel check.(PwLabel=[hwPwLabel] ,TeLabel=[hwTeLabel], PortName=[hwPortName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name Parameter Meaning

hwPwLabel

PW label.

hwTeLabel

Tunnel label.

hwPortName

Port name.

Possible Causes

Cause 1: The PW service failed.

Cause 2: The bearer tunnel of the PW was a non-TE tunnel.

Procedure

1.30 minutes later the alarm will clear

2.Clear the alarm by command

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >