L2VPN/4/hwPwSourceTunnelNoTeCheckAlarm_active

Message

L2VPN/4/hwPwSourceTunnelNoTeCheckAlarm_active: The packets are discarded because they do not match the PW source tunnel and contain no public network labels. (PwLabel=[hwPwLabel] , PortName=[hwPortName])

In VS mode, this log is supported only by the admin VS.

Description

Packets were dropped because they failed to pass the PW source tunnel check. These packets did not have tunnel labels.

Parameters

Parameter Name	Parameter Meaning
hwPwLabel	PW label.
hwPortName	Port name.

Possible Causes

The tunnel and PW labels carried in received packets did not match those on the local end.

Procedure

1.Check whether the tunnel and PW labels are configured correctly on the local end.

If they are configured correctly, go to Step 2.
If they are configured incorrectly, correct them and then go to Step 2.

2.Check whether the tunnel and PW labels are configured correctly on the remote end.

If they are configured incorrectly, go to Step 3.
If they are configured correctly, go to Step 4.

3.Collect alarm, log, and configuration information, and contact technical support personnel.

4.End.