BRASRDS/4/hwRadiusDiscardCachePacket
Message
BRASRDS/4/hwRadiusDiscardCachePacket: Packets buffered earliest were dropped because the memory usage reached the threshold. (MemoryUsage = [hwRadiusMemoryUsage], MemoryThreshold = [hwRadiusThreshold],CachePackets=[hwRadiusCachePackets])
In VS mode, this log is supported only by the admin VS.
Description
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
hwRadiusMemoryUsage |
Memory usage of the main control board. |
|
hwRadiusThreshold |
Alarm threshold for memory usage of the main control board. |
|
hwRadiusCachePackets |
Number of cached packets. |
Possible Causes
The memory usage of the main control board reached the configured threshold, and new accounting packets were generated and cached.
Procedure
1. Run the display memory-usage command to check whether the memory usage of the main control board reaches the threshold specified by MemoryThreshold in the alarm information.
- If so, go to Step 2.
- If not, go to Step 4.
2. Check whether the configured memory usage threshold of the main control board is too low.
- If so, run the radius-server accounting cache memory-threshold memory-threshold-value command to reconfigure a proper memory usage alarm threshold for the main control board.
- If not, go to Step 3.
3. Run the radius-server accounting cache max-packet-number command to reduce the maximum number of accounting packets that can be cached, and then check whether the memory usage of the main control board recovers.
- If so, go to Step 5.
- If not, go to Step 4.
4. Collect alarm, log, and configuration information, and contact technical support personnel.
5. End.