DEVM/2/hwSfbereAlarm_clear

Message

DEVM/2/hwSfbereAlarm_clear: Exceeding block error B2 counter in the multiplex section alarm resume.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],InterfaceName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwPhysicalPortName	Name of physical port.

Possible Causes

Cause 0:The fault triggering the alarm was rectified.
Cause 1:The fault triggering the alarm was rectified.
Cause 2:The fault triggering the alarm was rectified.
Cause 3:The fault triggering the alarm was rectified.
Cause 4:The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.