L2IF/4/hwSlotMacLimitNumRaisingThreshold_clear: MAC address learning based on SLOT is resumed. (L2IfPort=[L2IfPort], MacLimitVlanId=[MacLimitVlanId], MacLimitVsiName=[MacLimitVsiName], entPhysicalIndex=[entPhysicalIndex], aseTrapSeverity=[aseTrapSeverity], BaseTrapProbableCause=[BaseTrapProbableCause], BaseTrapEventType=[BaseTrapEventType], MacDynAddressLearnNum=[MacDynAddressLearnNum], MacLimitMaxMac=[MacLimitMaxMac], SlotName=[SlotName], DeviceName=[DeviceName])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
L2IfPort |
Interface name. |
|
MacLimitVlanId |
VLAN ID. |
|
MacLimitVsiName |
VSI name. |
|
entPhysicalIndex |
Interface index. |
|
aseTrapSeverity |
Alarm severity. |
|
BaseTrapProbableCause |
Alarm cause. |
|
BaseTrapEventType |
Alarm event type. |
|
MacDynAddressLearnNum |
Number of learned dynamic MAC addresses. |
|
MacLimitMaxMac |
Maximum number of MAC addresses that can be learned. |
|
SlotName |
Board name. |
|
DeviceName |
Device name. |
The number of MAC addresses learned per slot in the upstream direction fell below the alarm threshold.
This trap message is informational only, and no action is required.