SYSTEM/2/hwSystemConfigError_active-144128

Message

SYSTEM/2/hwSystemConfigError_active: A system configuration error occurs. ( EntityTrapFaultID = [EntityTrapFaultID])

In VS mode, this log is supported only by the admin VS.

Description

The system configuration is incorrect.

Parameters

Parameter Name	Parameter Meaning
EntityTrapFaultID	Trap error code: 144128: The PAF version is inconsistent with the version of the startup software package. 144129: The boards and subcards of the device are not inserted into the corresponding slots. 144130: The versions of the active and standby main control boards are inconsistent. 144133: The memory of the active main control board is inconsistent with that of the standby main control board. 144134: The PTN startup mode does not match the mode selected during license activation.

Parameter Name

Parameter Meaning

EntityTrapFaultID

Trap error code:

144128: The PAF version is inconsistent with the version of the startup software package.
144129: The boards and subcards of the device are not inserted into the corresponding slots.
144130: The versions of the active and standby main control boards are inconsistent.
144133: The memory of the active main control board is inconsistent with that of the standby main control board.
144134: The PTN startup mode does not match the mode selected during license activation.

Possible Causes

The version in the PAF file is inconsistent with that of the startup software package.

Procedure

The PAF version was inconsistent with the version of the startup software package.

1. Replace the PAF file with a PAF file of the same version as the system software package. Run the startup paf command to set the PAF file as the one to be loaded at the next startup. Then, run the reboot command to restart the device.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 2.

2. Collect alarm and configuration information, and contact technical support personnel.

3. No further action is required.