SYSTEM/2/hwSystemConfigError_active-144134

Message

SYSTEM/2/hwSystemConfigError_active: A system configuration error occurs. ( EntityTrapFaultID = [EntityTrapFaultID])

In VS mode, this log is supported only by the admin VS.

Description

The system configuration is incorrect.

Parameters

Parameter Name	Parameter Meaning
EntityTrapFaultID	Trap error code: 144128: The PAF version is inconsistent with the version of the startup software package. 144129: The boards and subcards of the device are not inserted into the corresponding slots. 144130: The versions of the active and standby main control boards are inconsistent. 144133: The memory of the active main control board is inconsistent with that of the standby main control board. 144134: The PTN startup mode does not match the mode selected during license activation.

Parameter Name

Parameter Meaning

EntityTrapFaultID

Trap error code:

144128: The PAF version is inconsistent with the version of the startup software package.
144129: The boards and subcards of the device are not inserted into the corresponding slots.
144130: The versions of the active and standby main control boards are inconsistent.
144133: The memory of the active main control board is inconsistent with that of the standby main control board.
144134: The PTN startup mode does not match the mode selected during license activation.

Possible Causes

The PTN start mode is inconsistent with that defined in the activated license.

Procedure

The configured startup mode (dcn-management-plane mode or dcn-control-plane mode) does not match the mode selected when the license is activated.

1. Run the display ptn-mode command to check the configured startup mode.

2. Run the active mode-control license or undo active mode-control license command to change the startup mode to be the same as that specified in the license file.

3. The device is restarted, and the NMS needs to reconnect to the device.

4. End.