SYSTEM/2/hwSystemConfigError_clear

Message

SYSTEM/2/hwSystemConfigError_clear: The system configuration error has been rectified. ( EntityTrapFaultID = [EntityTrapFaultID])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name Parameter Meaning

EntityTrapFaultID

Trap error code:

  • 144128: The PAF version is inconsistent with the version of the startup software package.
  • 144129: The boards and subcards of the device are not inserted into the corresponding slots.
  • 144130: The versions of the active and standby main control boards are inconsistent.
  • 144133: The memory of the active main control board is inconsistent with that of the standby main control board.
  • 144134: The PTN startup mode does not match the mode selected during license activation.

Possible Causes

  • Cause 1:A system configuration error was rectified.
  • Cause 144128:The fault was rectified when the version in the PAF file is inconsistent with that of the startup software package.
  • Cause 144129:The fault was rectified when the boards and subcards were installed in incorrect slots.
  • Cause 144130:The fault was rectified when the software versions on the master and slave control boards are inconsistent.
  • Cause 144133:The fault was rectified when the memory size of the system master main control board was inconsistent with that of the system slave main control board.
  • Cause 144134:The fault was rectified when the PTN start mode is inconsistent with that defined in the activated license.

Procedure

This alarm message is informational only, and no action is required.

Parent Topic: SYSTEM
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >