MPLS_LSPM/2/hwTeSourceInterfaceCheckAlarm_clear

Message

MPLS_LSPM/2/hwTeSourceInterfaceCheckAlarm_clear: No mismatch packets are found during the TE source interface check.(TeLabel=[hwRpfTeLabel], PortName=[hwRpfPortName])

Parameters

Parameter Name	Parameter Meaning
hwRpfTeLabel	Static LSP label value
hwRpfPortName	Interface name

Possible Causes

The incoming interface of the packet match the CR-LSP incoming interface.

Procedure

1. The alarm will clear 30 minutes later.

2. Run the corresponding command to clear the alarm. (After the alarm is cleared using the command, if the trigger condition is met, the command is not reported immediately, but reported after the suppression period expires.)