QOS/2/hwXQoSModeChannelOverPortShapAlarm_active

Message

QOS/2/hwXQoSModeChannelOverPortShapAlarm_active: The channelization bandwidth configured on the interface [interface-name] exceeds the port shaping value.

Description

The channelization bandwidth exceeds the port shaping value.

Parameters

Parameter Name	Parameter Meaning
interface-name	Mode channel interface name.

Possible Causes

The channelization bandwidth configured on the interface exceeds the port shaping value.

Procedure

1.Run the mode channel bandwidth bandwidth-value command in the interface view to decrease the channelization bandwidth to a value lower than the port shaping value.

Check whether the alarm is cleared.

If yes, go to 3.
If no, go to 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.