QOS/2/hwXQoSHardPipeApplyFailAlarm_clear

Message

QOS/2/hwXQoSHardPipeApplyFailAlarm_clear: The hard pipe not taking effect alarm on the interface [interface-name] has cleared.

This log is supported only on NetEngine 8000 F1A.

Parameters

Parameter Name	Parameter Meaning
interface-name	Hardpipe interface name.

Possible Causes

The bandwidth of the IP hard pipe was lower than the value obtained by subtracting 20 Mbit/s from the smaller value of the interface bandwidth and port shaping value.

Procedure

This trap is informational only, and no action is required.