OSPF/2/ospfImptLsaMaxExceed_clear

1. Run the display ospf brief command to check whether the number of ASE LSAs generated when an OSPF process imports external routes reaches or exceeds 90% of the maximum number allowed.

• If the number reaches or exceeds 90% of the maximum number allowed, this trap message is informational only and no action is required.
• If the number has not reached or exceeded 90% of the maximum number allowed, go to Step 2.

Check the overload status based on the value of the Current status field in the display ospf brief command output. Normal: The number of LSAs generated when an OSPF process imports external routes is less than or equal to the lower alarm threshold (in percentage) multiplied by the maximum number allowed; Approach limit: The number of LSAs generated when an OSPF process imports external routes is approaching (reaching or exceeding 90% of) the upper alarm threshold; Exceed limit: The number of LSAs generated when an OSPF process imports external routes has reached or exceeded the maximum number allowed.

2. Perform the following operations as required:

• If a change in the limit on the number of ASE LSAs is allowed, run the import-route limit limit-number [ threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value ] command to change the limit.
• If a change in the limit on the number of ASE LSAs is not allowed, go to Step 3.

3. Contact technical support personnel.

4. End.