OSPF/2/ospfImptNssaLsaMaxExceed_active

Message

OSPF/2/ospfImptNssaLsaMaxExceed_active: The number of NSSA LSAs generated when an OSPF process imports external routes exceeds the configured maximum number.(hwOspfv2ProcessIdIndex=[hwOspfv2ProcessIdIndex], hwOspfv2AreaId=[hwOspfv2AreaId], hwOspfv2MaxLimit=[hwOspfv2MaxLimit])

Description

The number of NSSA LSAs generated when an OSPF process imports external routes reached or exceeds the configured maximum value. When the number of NSSA LSAs generated when an OSPF process imports external routes reaches or exceeds the configured maximum value, the alarm is generated.

Parameters

Parameter Name	Parameter Meaning
hwOspfv2ProcessIdIndex	Indicates the OSPF process ID.
hwOspfv2AreaId	Indicates the ID of an OSPF area.
hwOspfv2MaxLimit	Indicates the maximum value for the number of NSSA LSAs generated when an OSPF process imports external routes.

Possible Causes

The number of NSSA LSAs generated when an OSPF process imported external routes reached or exceeded the maximum number allowed.

Procedure

1. Run the display ospf brief command to check whether the number of NSSA LSAs generated when an OSPF process imports external routes reaches or exceeds the maximum number allowed.

If the number reaches or exceeds the maximum number allowed, this trap message is informational only and no action is required.
If the number has not reached or exceeded the maximum number allowed, go to Step 2.

Check the overload status based on the value of the Current status field in the display ospf brief command output.

Normal: The number of LSAs generated when an OSPF process imports external routes is less than or equal to the lower alarm threshold (in percentage) multiplied by the maximum number allowed.
Approach limit: The number of LSAs generated when an OSPF process imports external routes is approaching (reaching or exceeding 90% of) the upper alarm threshold.
Exceed limit: The number of LSAs generated when an OSPF process imports external routes has reached or exceeded the maximum number allowed.

2. Perform the following operations as required:

If a change in the limit on the number of NSSA LSAs is allowed, run the import-route limit limit-number [ threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value ] command to change the limit.
If a change in the limit on the number of NSSA LSAs is not allowed, go to Step 3.

3. Contact technical support personnel.

4. End.