This table describes the attributes of an interface on which a QoS policy is applied.
The indexes of the table are hwCBQoSIfApplyPolicyIfIndex, hwCBQoSIfApplyPolicyDirection.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.1 |
hwCBQoSIfApplyPolicyIfIndex |
Integer32 |
read-only |
This object indicates the index of the interface to which the policy is applied. Value range: Default value: Note: The value cannot be the index of an interface on a main control board or a Layer 2 interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.2 |
hwCBQoSIfApplyPolicyDirection |
INTEGER{inbound(1),outbound(2)} |
read-only |
The value of this object identifies the direction in which a policy is applied. The value can be inbound(1) or outbound(2). This object has no default value. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.3 |
hwCBQoSIfApplyPolicyName |
OCTET STRING{(1,127)} |
read-create |
This object indicates the policy name. The value of this object is a string of 1 to 127 visible ASCII characters. This object has no default value. Space cannot exist between the characters in the string. The initial space and end space are ignored. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.4 |
hwCBQoSIfApplyPolicyRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
This object indicates the row status. The value can be one of the following: Active (1), CreateAndGo (4), and Destroy (6). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.5 |
hwCBQoSIfApplyPolicyLinkLayer |
INTEGER{linklayer(1),alllayer(2),iplayer(3),mplslayer(4)} |
read-create |
This object indicates the forwarding layer at which the policy takes effect. |
The actually supported access is read-only. |