This table is used to display information about traffic policies applied to VLAN packets.
The indexes of the table are hwCBQoSIfVlanApplyPolicyIfIndex, hwCBQoSIfVlanApplyPolicyDirection, hwCBQoSIfVlanApplyPolicyVlanid1, hwCBQoSIfVlanApplyPolicyVlanid2.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.1 |
hwCBQoSIfVlanApplyPolicyIfIndex |
Integer32 |
read-only |
This object indicates the policy index of a Layer 2 interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.2 |
hwCBQoSIfVlanApplyPolicyDirection |
INTEGER{inbound(1),outbound(2)} |
read-only |
Indicates the direction to which the policy is applied. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.3 |
hwCBQoSIfVlanApplyPolicyVlanid1 |
Integer32 |
read-only |
This object indicates the start VLAN ID of a policy on a Layer 2 interface.. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.4 |
hwCBQoSIfVlanApplyPolicyVlanid2 |
Integer32 |
read-create |
Start VLAN ID or CE VID of a traffic policy on a Layer 2 interface. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.5 |
hwCBQoSIfVlanApplyPolicyCeVidEnd |
Integer32 |
read-create |
This object indicates the CE VID of a policy on a Layer 2 interface. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.6 |
hwCBQoSIfVlanApplyPolicyName |
OCTET STRING{(1,127)} |
read-create |
Indicates the policy name. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.7 |
hwCBQoSIfVlanApplyPolicyRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
This object indicates the status of the policy row on a Layer 2 interface. The value can be one of the following: active, createAndGo, and destroy. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.8 |
hwCBQoSIfVlanApplyPolicyLinkLayer |
INTEGER{linklayer(1),alllayer(2),iplayer(3),mplslayer(4)} |
read-create |
Indicates the link layer. The value range is: link-layer(1),all-layer(2),ip-layer(3),mpls-layer(4). |
The actually supported access is read-only. |