The clock source config table.
The system clock source selection table.
The indexes of the table are hwClockCfgChassisIndex, hwClockCfgSourceIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.1 |
hwClockCfgChassisIndex |
Integer32{(1,2147483647)} |
not-accessible |
The index of the chassis whitch the clock source belongs to. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.2 |
hwClockCfgSourceIndex |
Integer32{(1,20)} |
not-accessible |
The clock source index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.3 |
hwClockCfgSourceId |
Integer32 |
read-only |
The clock source ID. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.4 |
hwClockCfgSourceDescr |
OCTET STRING |
read-only |
The clock source description. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.5 |
hwClockCfgWtrTime |
Integer32{(0,12)} |
read-write |
The waiting for restore time of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.7 |
hwClockCfgSystemPriority |
Integer32{(-1,255)} |
read-write |
The priority of system clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.8 |
hwClockCfgBits0Priority |
Integer32{(-1,255)} |
read-write |
The priority of BITS0 clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.9 |
hwClockCfgBits1Priority |
Integer32{(-1,255)} |
read-write |
The priority of BITS1 clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.13 |
hwClockCfgSourceSsm |
INTEGER{ssmPrc(1),ssmSsut(2),ssmSsul(3),ssmSec(4),ssmDnu(5),ssmUnknown(6),ssmPrtc(7),ssmEPrtc(8),ssmESec(9),ssmEPrc(10)} |
read-write |
The SSM quality of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.14 |
hwClockCfgSourceSsmSetMode |
INTEGER{manual(1),auto(2)} |
read-write |
The set mode of SSM. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.16 |
hwClockCfgSwiEnableStatus |
INTEGER{enabled(1),disabled(2)} |
read-write |
he enable status of clock source switch. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.17 |
hwClockCfgSourceState |
INTEGER{normal(1),abnormal(2)} |
read-write |
The state of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.18 |
hwClockCfgSsmThreshold |
INTEGER{qlDnu(1),qlSec(2),qlSsub(3),qlSsua(4),qlPrc(5),qlPrtc(6),qlEPrtc(7),qlESec(8),qlEPrc(9)} |
read-write |
The SSM quality level threshold of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.21 |
hwClockCfgHoldOffTime |
Integer32{(3,18)} |
read-write |
The hold off time of clock, unit in 100ms. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1.24 |
hwClockCfgClkSourceType |
INTEGER{bits(1),line(2),inner(3),system(4)} |
read-only |
The type of clock source. |
This object is implemented as defined in the corresponding MIB files. |